Most breeding users know that group farming is a relatively common method. For example, there are many knowledge about raising chickens, so do you know the advantages of using poultry battery cages to raise chickens?

The so-called use of chicken cages to raise chickens means that the chickens are housed in cages welded with wire. Different types of chicken cages are designed according to the type, sex and age of the chicken. So, the main advantages of chicken cages:

First of all, chickens have good epidemic prevention and effective prevention of infectious diseases: chickens do not touch feces, which can make chickens grow healthier and provide a clean and comfortable growth environment for chickens.

In the process of raising chickens in chicken cages, chickens will not directly contact the feces, so cage farming can greatly reduce the diseases caused by fecal infection, reduce the incidence of diseases, and facilitate the handling of feces.

The use of chicken cages to raise chickens allows chickens to have sufficient feeding and drinking positions, ensuring that each chicken can get reasonable drinking and feeding, making the chickens evenly distributed.

The above points are the advantages of raising chickens in chicken cages described by the author. Generally, the breeding quantity is less than 1,000. It is best for farmers to use flat or free-range breeding. This breeding method is the most cost-effective and can quickly return to cost. If the breeding volume is more than 3,000 or more, then the author recommends the use of chicken battery cages, which is convenient and labor-saving.

When chickens are raised in summer due to temperature, it is easy to cause bacteria to grow in the house. So how to manage the high temperature in summer to ensure the survival rate of broilers in poultry cage manufacturers in nigeria?

The first is to reduce the breeding density in the chicken coop, otherwise it will cause heat stress. Farmers should eliminate sick chickens in a timely manner, which can reduce the breeding density, and also avoid their casualties affecting healthy chickens. Summer temperatures are high and flocks need more water. In addition, the water must be clean. Unclean water can easily cause disease. Therefore, chicken farmers should adjust the waterline in time in summer to supply sufficient clean drinking water.

The henhouse fan cannot be stopped in summer, and the water curtain cannot be cut off. If there is a power outage, many chickens may die. Therefore, make sure that the circuit is correct. In addition, under high temperature and high load, electricity is prone to problems, such as fire. Protection. In summer, there is not only high temperature, but also windy and rainy weather. Chicken farmers should pay attention to not only temperature but humidity, as well as the shock, rain, and water that might be caused by windy and rainy weather.

In summer, chickens need to emit a lot of heat during feeding. Chicken farmers should avoid the time when the heat emitted by the flocks is high during the day, such as noon time. So feeding in summer is generally morning and evening. In summer, the temperature is high and the humidity is high, and there is much rain, and the feed is prone to mildew. In addition, in order to ensure that the feed does not become moldy because it is not eaten for a long time after entering the trough, chicken farmers should ensure that the trough is cleaned once a day. Note that heatstroke and cooling products are added to the feed. Generally, chicken farmers in summer need to add multiple dimensions to improve the flock's ability to resist heat stress.

If the temperature is too high, ventilation should be strengthened. If it cannot be lowered, the water curtain needs to play a cooling role. In the process of chicken breeding, pay attention to the balance of humidity and temperature. When the humidity is too high, the water curtain should be turned off in time to increase the role of the fan. It is necessary to pay attention to the cooling during the day, and the cooling of the ventilation at night cannot be ignored. The climate change in summer is very different, so in order to improve the survival rate of broilers and reduce the losses of chicken farmers in battery cage for chickens
.

Nowadays, when farmers raise chickens, they choose to use poultry breeding equipment (layer chicken cages / broiler cages) for breeding. When farmers use chicken equipment for breeding work, in order to make these chicken equipment play the best effect, before use, farmers can learn from manufacturers the correct use of equipment and precautions. In addition, farmers need to pay attention to a few issues in the process of use, now the author will talk about it.

1. First of all, when we use full-automatic chicken breeding equipment for breeding work, we need to pay attention to prevent illness while carefully feeding. According to the different growth stages of broilers, diets were prepared according to feeding standards.

2. Regular disinfection in a timely manner. First of all, chicks should be introduced from healthy breeder farms to prevent vertical transmission of pathogens. Second, create a good breeding environment, disinfect regularly, and prevent horizontally transmitted diseases.

3. Secondly, we also need to do a good job in epidemic prevention. When using full-automatic chicken breeding equipment, a soft rubber strip can be added to the bottom of the cage to prevent the breast of the broiler from coming into direct contact with the pointed iron wire and causing chest cysts. Regular management of temperature, humidity, ventilation and light is a prerequisite for preventing the occurrence of chicken respiratory diseases.

4. Another thing is to pay attention to ventilation. Because the climate is cold in winter, and the temperature inside the house is very different from the outside temperature, it is necessary to ventilate and maintain the temperature in the house. This is also the main problem to be solved in winter. The hen house requires good thermal insulation performance, and it is especially necessary to prevent the chicks from being killed by squeezing together due to low temperature. In general, ventilation starts at the age of 6 days, and the ventilation volume is increased with the increase of chicken age to reduce the concentration of harmful gases in the house. Remove faeces and wet litter in a timely manner.

The above are the issues that need to be paid attention to when farmers use chicken equipment for breeding work. I hope the above introduction can provide some help for everyone, if you want to get further understanding. Or if you have any other questions, you can consult the technical staff of the poultry equipment manufacturers for related content.

In the whole process of chicken raising, it is not only relying on poultry breeding equipment and layer chicken cages to improve the economic benefits of chicken raising. It is also necessary to continuously accumulate lessons in the process of chicken breeding, so as to conclude a chicken breeding process suitable for itself, in order to do professional chicken breeding. The author consulted farmers and poultry farming equipment suppliers with many years of breeding experience, and summarized several chicken breeding experiences, and now I will share with you.

1. It is also very important to choose high-quality feed and chicken seedlings, choose the right time to enter the seedlings and do a good job of marketing the broilers.

2.Be sure to make adequate preparations in all aspects before entering the chicken, so as to lay the foundation for the batch of broilers to be released successfully.

3. Strengthen daily breeding management and correct disinfection. Disinfection solution can be used for drinking water disinfection in the later period.

4. Each disease should adhere to the concept of prevention-oriented, the dosage should be accurate, the course of treatment should be sufficient, to prevent multi-use and random use, and truly implement health care.

5. Group in time, maintain good ventilation, maintain temperature stability, prevent colds, and prevent the occurrence of large rods, coccidia, and ascites.

6. Maintain a proper feeding density, preferably less than 8 per square meter.

7. Spray in the hot season to prevent heat stress.

8. To prevent the poisoning of chickens caused by excessive medication, we should also pay attention to the unfortunate mentality of not taking medications in time to prevent the outbreak of chickens.

9. Chicken farmers should communicate with the after-sales in time to report the true situation of the flock and the previous medication situation in order to use the medicine more accurately.

10. It is recommended to use concentrated medicine to drink water before 20 days, preferably after 4 hours or throughout the day. Adult chickens can be used for about 2 hours. Some medicines are best taken in the morning and afternoon, and the reference for drinking water is to drink them throughout the day (20% in winter and 25% in summer).

The above are the ten chicken-raising experiences shared by the author. At the same time, you are also welcome to share your chicken-raising experience with us. Thank you for your attention!

1. There are many specifications of battery brooding chick cages, because the number of breeders and the area of chicken coops are different for each breeder, so the specifications are more to adapt to each henhouse and breeder. In the structure, the cage is separated in the middle, the chicken battery cages can be fed on both sides, and there are regulating nets on both sides of the cage, which can be used for brooding and breeding.

2. Poultry breeding equipment manufacturers generally design cage bottom nets that are dense and long when producing stacked brooding cages. This is because chicks are too small and the design is too wide to drop chicks.

3. The layered brooder cage is generally three-dimensional structure according to the structure of the cage frame. Generally, the number of layers provided by manufacturers is divided into 3 or 4 or more layers, depending on the needs of farmers. There is a faecal plate in between, which is convenient for the chicks to fall directly on the feces after they produce feces. It does not directly contact the chicks, which reduces the chance of infection.

4. Feeding troughs and water troughs will be set on both sides of the cascading brooding cage, which is convenient for chicks to eat and drink.

5. The advantage of using a layered brooder is that it can make full use of the area of the brooding room, which is convenient for heat preservation and disinfection, separates chicks from chicken manure, reduces the incidence of diseases such as coccidiosis, and improves survival.

6. Generally, when the chicks are transported to the broiler house, the chicks will be placed on the upper 2-3 floors. As the chicks grow older, the area occupied by the chicks gradually increases, and the chickens in the upper cage are gradually transferred to the lower cage to reduce the feeding density. This can reduce the stress response of the swarm, improve the survival rate, and also facilitate early thermal insulation.

7. The chicken cage also has a herringbone structure. This structure is called a step-type brooder by the farmers. Such chicken cage chicken flocks will directly leak to the bottom of the cage after the chicken manure is generated. It is similar to the structure and use method of the layered brooder.

That ’s all for now. It ’s about cascading brooding cages. In order to obtain a better survival rate for chicks, in addition to working hard on the way of raising chickens, more attention should be paid to feeding management. Good poultry battery cages and equipment, and sophisticated breeding management can better breed chickens and lay a solid foundation for later earnings.

As the temperature in summer is getting higher and higher, the feed intake of many chickens has declined. In fact, the feed intake of chickens in the hot summer is more common, especially in the late stage of broiler breeding poultry feeder price in nigeria. So what are the specific reasons?

This hot weather can easily breed bacteria and cause disease in chickens. Many chicken diseases can cause the loss of appetite of chickens, resulting in a decline in feed intake. This will not only occur in summer, but will occur throughout the year. In addition, the chickens drink plenty of water in the summer, and the intestines are prone to problems. If ventilation and cooling are not well controlled, heat stress or cold may cause some chicken diseases, resulting in chicken appetite loss. Chicken farmers can combine other symptoms to diagnose chicken disease and treat it symptomatically, so as to solve the problem of reduced feed intake of chicken flocks.

The most important thing in raising chickens in the henhouse in the summer is to prevent heatstroke and cool down. Although there are various ventilation facilities and water curtains, it is still difficult to achieve the ideal temperature for all chickens in the house. If the temperature is not controlled well, the flock will have mild or severe heat stress. Once the heat stress, the flock will like to drink water, eat less, and the feed intake will naturally decrease. Therefore, strengthening the exhaust air, increasing the wind speed, and using more water curtains to ensure that the chickens are not exposed to the cold, to maximize the control of heat stress, are the key links to avoid the
chickens' appetite in the summer.

broiler chicken farm cage in Nigeria for chickens has a relatively poor living environment, small living space, and high density of chickens. This makes it easier for chickens to dissipate body heat in summer. Therefore, it is necessary to reduce the feeding density properly in summer. In addition, reasonable nutritional matching, suitable feed ratio and mouthfeel, and the addition of some additives or traditional Chinese medicine preparations to regulate intestinal tract, improve immunity, prevent heatstroke and lower temperature, can help reduce the loss of appetite in chickens.

Chicken feed is divided into big chicken feed and small chicken feed. In addition to different feed nutrients, these feeds also have different particle sizes. Even the size of feed pellets varies from manufacturer to manufacturer. Chickens are inconvenient to feed with feed particles that are too large, and picking will occur. In addition to different feed particle sizes, it will cause chickens to pick, and changes in feed ingredients will also cause chickens to pick. Chickens have a sense of taste and smell. Adding some inferior raw materials to the feed ingredients, such as inferior oils and fats, will result in poor palatability of the feed, and the chicken will throw out food. This situation will be improved by changing feed.

Do you know the work flow of using the battery layer chicken cages and its additional equipment in the hen house?

1. Feed tank trucks for laying hen breeding equipment, send feed to the feed storage tower outside the chicken house on time. Then, the lateral feeding device sends the feed in the feed tower to the feeding hopper of each row of cages according to the set time.

2. After the last driving hopper is full of feed, the horizontal feeding device automatically stops feeding. The feeding carriage runs backward according to the set time. When it reaches the end of each row of cages, the carriage stops automatically. During operation, the hopper on each floor of the truck corresponds to a hopper, which can evenly feed the feed in the hopper, and each chicken can freely eat fresh feed.

3. After the chickens have eaten the feed in the trough, the feeding carriage will automatically run to the front of the cage, and then stop automatically at the position of the head rack. During the operation, the truck once again dropped the feed evenly in the trough. This process completed a feeding procedure. The number of feeds per day depends on the craft of each farm. The water supply line of the layered layer chicken cages is set in the middle of the top of each layer of chicken cages, and two nipples are set in each cage for the chickens on the left and right sides to drink water. A V-shaped sink is set up below to catch the water splashed by the chicken when drinking, and then evaporate naturally. The splash will not fall into the chicken dung, which makes the chicken dung drier.

4. A filter, a smart water meter, a dosing device and a decompression regulator are set at the front end of each water line. Through the digital information of the smart water meter, you can understand the daily drinking water of the flocks. The working process of the laying hen breeding equipment can also determine the health status of the flocks.

The above is what the author tells you. The basic process when using layer chicken cages to raise chickens in South Africa, I believe everyone has a basic concept of raising chickens. If there are other problems, farmers can consult the technical staff of the poultry farming equipment wholesaler.

Drinking water in the chicken farm in summer is very important, but it is also important to drink water in the autumn and winter seasons in poultry feeders and drinkers price in nigeria. In fact, chickens also need water to maintain normal life activities and production in winter. Egg production declines. In severe cases, egg production ceases, chickens lose weight, and eventually die from failure. Therefore, the following issues should be noted when drinking water in winter.

 The water temperature should not be too low. Drinking too cold water can reduce the egg production rate and increase the feed consumption. Generally, the water temperature is preferably 10 ° C-20 ° C. If possible, a large container can be placed in the chicken house to let the water temperature rise.

The water in the water tank should not be too much, so as to avoid freezing injury on the chicken body. For flat chicken houses, the drinking trough must have a device to prevent the chickens from entering the trough.

The water quality is clean and sanitary, and the water tank should be cleaned frequently.

 The water requirement of chickens is generally twice the feed intake, but the actual demand is often affected by the temperature and the type of feed intake. Therefore, sufficient water should be provided to allow chickens to drink water in Chicken Battery Farm Equipment For Sale.

Details of laying hens in Tanzania used laying hen breeding equipment. With the gradual evolution of the breeding industry now, more and more chicken farmers use laying hen breeding equipment to raise laying hens. What should we pay attention to in the process of breeding layers? The following author will explain to you, the details about the laying hens using the laying hen breeding equipment to pay attention to.

1. Stage feeding can not be ignored: the laying period of commercial laying hens is divided into 3 stages, and each stage is fed with diets with different nutritional levels to meet their egg production needs. In the early stage of egg production, that is, from the start of production to the peak of egg production, the egg production rate is more than 80%. The nutritional content of protein and calcium in the diet during this period should increase with the increase of the egg production rate of the flock. In the middle period of laying, which is a period after the peak of laying, the laying rate is 65% -80%. In the late laying period, the laying rate is less than 65%. The protein, calcium, and phosphorus content of the diets at these two stages should decrease as the egg production rate of the flock decreases.

2. Do a good job of controlling the age of primiparous births: Adopting the fasting method during sexual maturity period will have a good effect on delaying the age of primiparous broilers and increasing the high and stable yield of chickens. The specific method is to start fasting for 8-10 days after the flock laying rate reaches 5%.

3. Master the scientific feeding time and frequency: In order to maintain the strong appetite of the flock, there must be a certain slot setting time every day to prevent the feed from being stored in the feeding tank for a long time, which will cause the chicken to have anorexia and picky eating habits.

4. Drink water in time. If the flock is cut off for 24 hours, the egg production will decrease by 30% and it will take 25-30 days to return to normal. If the flock is cut off for 36 hours, the egg production will not return to the original level. If the water is cut off for more than 36 hours, some chickens will stop laying eggs, which will cause moulting. Therefore, adequate drinking water must be provided in a timely manner.

5. Feed some health sand appropriately: Whether it is breeder or commercial layer hen, it is necessary to supplement grit frequently, especially for cage chickens. The size of the gravel should be moderate, preferably 4-5 mm in diameter. Feeding method is that flat chickens can be placed in sand troughs, and cage chickens can be mixed with 0.5% grit in the feed.

The above is what the author explained to you about the benefits of using laying egg hen cage equipment for chicken breeding. After reading the above article, do you have a deeper understanding of laying hen breeding equipment? In later life, I can also use this knowledge cleverly to solve problems.

The use of poultry farming equipment to raise chickens is a particularly popular way of raising chickens in the chicken industry in recent years. It is the laying of laying hens and broilers in laying hen cages and meatchicken cages, which can be easily managed by farmers. Moreover, the use of poultry farming equipment to raise chickens is multi-layered farming, which can increase the amount of farming in the same area. How to use chickens in poultry farming equipment reasonably? The following author will tell you about it for farmers to refer to.

1. Build a reasonable chicken house: use poultry farming equipment to raise chickens, and farmers should build a closed chicken house to ensure stable environment and heat insulation.

2. Reasonable choice of chicken cage equipment: Chicken cage equipment is divided into two types: broiler cage and egg cage according to the broiler and laying hen. Farmers should consider whether to raise laying hens or broilers, and choose the type of cages reasonably, and choose the specifications of each cage according to the area of the house, so as to make reasonable use of the area of the house and play better efficiency.

3. Pay attention to the stocking density: When using chicken cage equipment to raise chickens, farmers should pay attention to the number of chickens raised in each layer, and make regular adjustments according to the growth stage of the flocks to prevent the density from being too small and lead to susceptible diseases. It is easy to cause the chicken to be stuffy, trampled to death, etc., and loses the economy.

4. Pay attention to the hygiene of chicken cage equipment: laying hens and broilers live in cages for a long time, so the chicken cages are prone to residual feathers, feed, and water in the cage. Not only does it produce bacteria that affect the health of the chicken, but it can also corrode the cage and affect life. Therefore, farmers should regularly clean and disinfect the equipment, kill bacteria, ensure the health of the chickens and the quality of the chicken cage equipment.

The above four points are the author's points, the rational use of poultry farming equipment, for farmers to refer to. Farmers who have questions about other chicken cage equipment can consult the technicians of the poultry equipment manufacturer.

The temperature in winter is low, the chicken house should pay attention to keep warm while paying attention to the ventilation of the chicken house, how to raise chicken in winter battery cage system for layers price in india? Do a good job in cold insulation. Insulation is the key to raising broiler chickens in winter. Good house maintenance should be done before the cold weather comes. Tight doors and windows, tight gaps in the house should be kept constant, and the temperature difference between day and night should not be too large.

Note that the chickens in the ventilation and ventilation broiler have a high density and rapid growth. As the body weight increases, the amount of breathing and excretion also increases. If the ventilation is not properly performed, the humidity in the house is not too high, and It also causes air pollution in the house and the concentration of ammonia is too large. If the stove is installed in the house, and the content of harmful gases such as carbon monoxide is increased, it is extremely unfavorable for the growth and development of the broiler chickens, and even causes poisoning.

Adjusting the composition of the diet In winter, the temperature is low and the metabolism of the chicken is strong. The energy level in the diet can be appropriately increased. According to the data, in the winter broiler diet, 2% to 5% of animal and vegetable fats are added, which can achieve better weight gain. In winter, broiler chickens can be fed freely and freely. The number of feedings should be increased appropriately. Each chicken should have a trough of 3 to 5 cm, 23 hours of light per day, 1 hour of darkness, and 1 to 2 light intensity. W/m 2. Due to the high humidity in the house, the air is relatively dirty, and the broiler chicken is susceptible to coccidiosis and respiratory diseases, so be careful.

The disinfection work should go through the whole process of raising chickens. Winter temperatures are low and the frequency of bacterial activity is decreasing. However, the winter climate is cold and the resistance of chickens is generally weakened. If neglected disinfection, it is easy to cause disease outbreaks. The winter night is long and short, and the laying hens will cause a drop in egg production due to insufficient light. In order to overcome this natural defect, it can be compensated by artificially supplementing the illumination. Under normal circumstances, the total time of daylighting should not be less than 14 hours, and no more than 17 hours. For example, the natural light during the day is 12 hours, and artificial light is required for 2-5 hours per day.

Chickens get heat by eating the feed into the body for Poultry Rearing Equipment to maintain body temperature. The lower the outside temperature, the more the chicken consumes the heat that protects the cold. According to the measurement, the feed consumption of winter chickens increased by 10% compared with other seasons. Therefore, in the winter chicken feed must ensure sufficient energy, in addition to ensuring a certain proportion of protein, should increase the high-energy feed containing more starch and sugar to meet the physiological and production needs of chicken. The resistance of chickens in winter is declining. Special attention should be paid to the prevention and prevention of diseases and regular vaccination. According to the actual situation, some preventive drugs can be regularly fed to increase the content of vitamins and trace elements in the feed.

In the process of raising chickens, the drinking water system of poultry farming equipment is one of the necessary equipment for each chicken farm. Water is an indispensable substance for the growth of flocks, so the drinker becomes a must. Now when farmers choose a water drinker, they will use a nipple drinker to save water and improve work efficiency. The following author will introduce how to choose the chicken drinking device and what are the points of attention for installation.

1. The purchase of nipple drinkers, when farmers buy drinking fountains, you need to pay attention to two points:

(1) When selecting a manufacturer, do not look at the price of the product first, and pay attention to the quality of the product. Choosing a poultry equipment manufacturer with good product quality and high after-sales service is the basis for the purchase of nipple drinkers. Farmers should also pay attention to the quality of the seal ring, and choose to make it with PTFE. Because the sealing ring of this material has good elasticity, good quality, is not easy to aging, and has a long service life.

(2) There are many models of drinking fountains. When selecting farmers, they should choose a reasonable type of drinking nipple according to the different production stages of the flock. The strength of the chick licking nipple is small, and the nipple with low nipple opening force should be selected, generally about 10g. Adult chicken should be larger, about 40g.

2. Installation of the nipple drinker:

(1) When installing the drinker, the farmer must pay attention to the manufacturer to understand the points, or read the instructions carefully. The installation should be standardized and reasonable, and the water pipes should be straight and ensure that the water supply in each section of the water pipe is even. A water tank should be installed in each layer of chicken cage, and a water level regulator should be installed in the water tank to ensure proper water pressure and water flow in each section of the water pipe. A water filter should be installed at the beginning of the water source to prevent foreign matter from clogging the drinking nipple. The nipple drinker should be installed vertically downwards, otherwise water leakage may occur.

(2) The installation of the chick cage nipple drinker should be based on whether the chick can reach the nipple. It is best to leave an adjustable space to adjust the height of the nipple according to the growth of the chicken. This can not only meet the habit of drinking water from the nipples of the chickens, but also prevent the chickens from reaching the nipples, or the nipples are too low, and the chickens often encounter the nipples and leak water.

(3) Installation of adult poultry farming chicken cage nipple drinker, drinking nipple should be installed in front of the poultry farming chicken cage, between the two cages is appropriate. This will reduce the chances of chicken activity and water leakage when hitting the nipple. Each cage has 2 nipples for drinking water.

The above is the author's description, the purchase of drinking water using poultry farming equipment, as well as some precautions for installation, only for farmers to refer to. If you have a need to purchase a poultry drinking system or have other questions, you can consult a technician at a poultry equipment manufacturer.