A group of cute chicks
These chicks were born form egg shells, so cute.
Feeding chicken.
Many chickens are eating food.
poultry farming.
These chicken so beautiful, how did they do it?

What should I pay attention to when raising broilers in winter?

In winter, the temperature is very cold, and the temperature required by the automated chicken cage equipment is very different from the outside temperature. Ventilation and heat preservation must be done well. When ventilating, be careful not to fluctuate the temperature in the warehouse. In order to prevent stress and disease caused by excessive temperature difference, the vent should be 1.5 meters higher than the back of the chicken. When the working temperature drops sharply, the insulation work cannot keep up, which often causes the broilers to feel cold, cough, sneeze, and have difficulty breathing. Therefore, breeders must do a good job in temperature changes, cold protection, and heat preservation to prevent thieves and draughts from attacking the chickens.


In winter, the temperature is very cold. In addition to heat preservation work, it is necessary to promptly remove the flocks of excrement and wet litter. If it is not cleaned up in time, it will cause the accumulation of ammonia in the chicken house and increase its concentration, which may cause ammonia poisoning or cause broiler diseases. Moreover, due to the accumulation of ammonia and the relative lack of oxygen, coupled with severe cold weather, chickens have a fast metabolism, and broilers that grow too fast are prone to ascites. Therefore, farmers should lay more than 5 cm of litter to prevent the sink from leaking and wetting the litter. If the humidity is too high, remove the feces and wet litter in time, or use ammonia-absorbent deodorant to reduce the ammonia concentration in the chicken house.


According to different growth stages of broilers, diets should be configured according to feeding standards. Due to the lower temperature in winter, the broilers consume more calories, and the humidity of the medicine improves the metabolizable energy standard of the feed. At the same time, the proportion of protein is appropriately reduced to meet the demand for vitamins. Feed should be prepared immediately to prevent freezing. If possible, feed after heating. The configured feed must be free of mildew and impurities to prevent respiratory diseases.


In the breeding process, regular disinfection is required to prevent the spread of diseases, and insist on disinfection with chickens to eliminate rodents. After sick chickens are sick, they should be isolated from healthy chickens for treatment, and dead chickens should be buried deeply. Try to reduce the necessary stress factors in the breeding process, take all feasible means to feed the chickens, ensure the body's energy needs, and enhance the chicken's disease resistance.


Why do novices dare to start poultry farming with the poultry cage system?

The current breeding method has changed a lot from before. The emergence and prevalence of poultry cage systems have made poultry farming easy and happy, and many novice farmers are also willing to carry out breeding projects. 

Modern poultry farming equipment has basically realized automatic operation. Farmers no longer have to work on the chicken coop every day.

The most commonly used poultry farming equipment include the layer cages for sale, battery broiler cages, poultry brooding cages of poultry cage system, and automatic feeding equipment, automatic egg collection equipment, automatic manure removal equipment, automatic water supply equipment, automatic ventilation equipment, etc. With their mutual cooperation, intensive farming can be realized.



Modern poultry farming equipment is mechanized equipment. It is necessary to understand how to operate it before using it, so that good results can be obtained. Therefore, when buy poultry equipment, you must ask the manufacturer clearly and learn how to operate the equipment.

When carrying out breeding, we must pay attention to the breeding density. Breeders must remember not to expand the breeding density at will. Failure to follow the standard density will cause unbalanced growth of chickens. Therefore, in the process of raising chickens, farmers must not covet the number of breeding and ignore the appropriate density.

The above is the use of poultry equipment to carry out breeding projects for everyone to share, even if you are a novice, you don't need to worry.


How to choose poultry cages

Poultry cages are now the most common method of poultry farming. Because the poultry cage system not only provides a suitable environment for the chickens, but also allows the chickens to play a better role in the breeding process.


How to choose poultry layer cages

  1. Since automaticchicken raising is more popular nowadays, when choosing the size of the layer cage, you should consider whether you need to install automatic chicken farming equipment to assist in raising chickens. If necessary, the size of the layer cage should be based on the automation equipment. The area to choose from.


  1. Although there are many sizes of layer cages, the area of each farmer’s chicken house is also diverse. The reason for the many sizes of layer cages is to facilitate the different sizes of chicken houses for each farmer. Let farmers choose the size of their own chicken coop, so farmers should choose according to the size of their chicken coop when buying layer cages. If you don’t know how to determine the required size, you can consult before buying The manufacturer’s technicians will recommend a suitable layer cage size according to the area of the chicken house.


  1. The number of layers that can be raised in different layer cage sizes is different. Therefore, when choosing the size, you should choose according to the number of layers to be raised. You can consult the manufacturer to determine the specific size and ability of the layer cage. quantity.


  1. If the size of the general layer cage cannot meet the size of the chicken house or the area ofthe chicken house is very different from the size of the general chicken house, the farmer can consult the technician who sells the layer cage for maternity leave. Some manufacturers can follow According to the needs of farmers, services such as design transformation or independent upgrade of equipment.



Problems to pay attention to when buy poultry layer battery cages


   1. When choosing equipment vendors, farmers should choose direct-sale manufacturers, because some agents often increase the price of equipment in order to make money, which will increase the cost for ordinary farmers. If you choose a direct selling manufacturer, there will be no intermediate price difference, and the price will be more advantageous. Moreover, if there is a problem with the equipment during the breeding period, you can directly contact the manufacturer, which is simple, convenient and fast.


  1. The angle at the bottom of the chicken cage must be accurate. If the angle is too small, the egg cannot be rolled out in time, and it may be trampled by the chicken. If the angle is too large, the egg will easily fall to the ground and be broken, or the egg rolling has a strong momentum. As a result, they will crash into each other. Generally, the slope of the bottom of the cage should be kept at 7 to 8 degrees. If farmers buy cheap chicken cages with unreasonable design, the egg breakage rate will increase. Although the cost of equipment is saved, the benefits are also reduced.


  1. At present, there are two kinds of cold galvanizing and hot-dip galvanizing layer cages on the market. The price of hot-dip galvanizing is a little higher because its service life is longer than that of cold galvanizing. When laying hens, consider the number of years of raising chickens. If the breeding time is longer, choose hot-dip galvanized layer cages. If the breeding time is not long, choose cold-galvanized layer cages with lower prices.


  1. Pay attention to the quality while comparing prices. Whether the cheap equipment is qualified in terms of quality. If you buy cheap equipment with poor quality, you need to maintain it frequently, increasing the cost of the equipment, and if the equipment is damaged, it will need to be repaired. It will adversely affect the growth and production of laying hens, and serious stress may occur.

The entire detailed process of poultry breeding chicken cage cleaning

Poultry breeding chicken cage washing procedure: The general cleaning procedure is: first outside and then inside, first general and then overall, first up and down, the principle of chicken cage from front to back.



1. Remove the chicken cage material line and water line equipment to the operation room.

2. Stay in the pipeline for at least 12H, and then rinse with clean water.

3. Clean the chicken manure and feathers around the chicken coop to improve environmental sanitation. There is no debris around the chicken house, and the items outside the house are neatly stacked.

4. Remove the roof and clean the dust and dirt on the scaffolding, roof beams and appliances.

5. The chicken manure on the floor and the floor of the chicken cage, and the entire chicken house should be cleaned. There is no chicken manure, chicken feathers, or dust in the house, so as not to block the sewer pipe during washing.

6. Clean the sewer pipes, drains, and sewage tanks to achieve drainage.

7. Before cleaning the chicken coop, cut off the main power supply in the house, and connect the washing machine and lighting power supply from the house, and connect the leakage protection switch to avoid electric shock accidents.

8. Clean the power distribution cabinet and power distribution box with a blower.

9. Before washing the chicken coop, spray the surface of the appliance with detergent through a low-pressure spray gun, and keep it in a wet or foamy state for more than 20 minutes. If a high-pressure spray gun is used at this time, droplets containing microorganisms will be generated, which will pollute the environment and people.

10. Then use a high-pressure spray gun to clean the contents of the chicken house from front to back. This is a prerequisite for the chicken coop.

11. When rinsing, use steel wire brushes to clean items such as cots, walls, etc. that are cleaned; clean up the dirt in the material bag in the shrinkage joint.

Regardless of whether it is a layer cage or a broiler cage before being cleaned and washed, employees can use insecticide fumigation for a period of time. In this way, arthropods and pests that are flying and lurking in crevices can be eliminated.


How to prevent diseases in layer cage breeding

Now layer cages are one of the most commonly used poultry farming equipment for chicken farmers. Chickens live in chicken cages, making it easier for farmers to manage. However, it is also necessary to prevent chickens from getting sick, to ensure that the quality of sanitation work meets the standards, to pay attention to the situation of the chickens in real time and to effectively grasp the health of the chickens.

When constructing chicken house, farmers first choose a place with a sunny, flat terrain, high dryness, convenient water access, far away from the village, and convenient transportation. The chicken house must be built in a place with high terrain, convenient drainage, and good ventilation; the inside of the house should be a concrete floor to facilitate cleaning and disinfection, and a sandy playground should be set outside the door.



The second is to ensure that the chicken house is ventilated and has a suitable temperature. Observe the condition of the flock. If they are evenly distributed, move freely, and are relatively quiet, the temperature of the chicken house is just right.

The third point is to formulate scientific immunization procedures. To ensure the healthy life of laying hens, when purchasing vaccines, you must choose those produced by regular large-scale manufacturers. The amount of vaccine should be sufficient, the immunization program should be reasonable, and the immunization method should be correct. In the early stage, immunization by nasal drops, eye drops or mouth drops should be promoted, and injections should be adopted in the later stage.

To sum up, the above are the specific measures for disease prevention in layer cages shared by poultry cage system manufacturers for farmers. Hope there is a place that can help farmers.


Automatic maintenance work of poultry farming equipment

The daily maintenance and maintenance of automatic poultry farming equipment is the basic work of farmers. The maintenance of equipment should be done daily to ensure the institutionalization and standardization of equipment maintenance. Here is a brief introduction to how to maintain and maintain poultry equipment.

In daily maintenance, farmers must pay attention to wiping the inside and outside of the battery chicken cages, and treat the parts such as the chicken cage door, screw, rack, and wheel box without oil pollution. In addition, some debris and dirt around the equipment should be cleaned up. This will not only ensure that the chicken growing environment is beneficial, but also extend the life of the equipment.



Second, because poultry farming equipment is basically in operation for a long time, it is necessary to ensure that the lubrication work between the equipment must be done well. Farmers should pay attention to whether the engine should be oiled and changed. Do not let the equipment make a rubbing noise. Pay attention to the condition of the oil tank to ensure that the oil pressure is normal and the oil path is unblocked.

The most important point is that the farmers must follow the relevant safety operating procedures in the daily use process, do not overload the equipment, ensure that the safety protection measures are complete and reliable, and promptly eliminate unsafe factors when problems are found.

The above is the daily maintenance of automatic poultry farming equipment shared for farmers, I hope everyone can learn.


Modern poultry farming equipment battery chicken cage

Modern chicken production is the use of modern scientific and technological equipment to manage chicken production, so that it can be professionalized and socialized, and make better use of various resources. Improved breed breeding, feed processing, disease prevention, management, and equipment production form an automated ladder. Poultry battery chicken cage system to achieve the goal of stable production, high efficiency, high quality, pollution-free and low cost.


What is modern chicken farming equipment?

The concept of modern chicken production can be summarized as: use modern labor means and modern science and technology to equip the chicken industry. Using modern economic management methods to scientifically organize and manage the chicken industry, in order to realize the internal specialization and various links of the chicken industry.

The socialization of chickens, the rational use of chicken germplasm and feed resources, (breeding, feed processing, disease prevention, management, and equipment production automation), establish a reasonable production structure and ecosystem for the chicken industry, and continuously improve labor productivity , The product rate and commodity rate of eggs and chicken meat will achieve stable, high-yield, high-quality, and low-cost chicken industry to meet social needs.



1 ladder chicken cage

The full-step chicken coop has 2~3 layers, and its advantages are: ①The cages of each layer have large open area, good ventilation and uniform illumination; ②The manure removal operation is relatively simple; ③The structure is simple and easy to repair; ④When the machine fails or power outage Convenient for manual operation. The disadvantage is that the stocking density is low.


2 half-step chicken coop

In order to further increase the stocking density, on the basis of a full-step cage, the upper and lower layers are partially overlapped to form a half-step chicken cage. Its feeding density is higher than that of the full ladder, which can generally be increased by about 30%, but it is lower than that of the stacked type. Compared with the full ladder chicken cage, due to the obstruction of the manure baffle, the ventilation effect is poor, but the operation is more convenient and it is easy to observe the status of the chickens.


3 battery chicken cage

The upper and lower layers of the half-step broiler cage are completely overlapped to form a stacked chicken cage. There is a conveyor belt between the layers to remove the chicken manure. Its advantages are: high house feeding density, greatly reduced chicken farm floor area, and improved production efficiency of breeders; but higher requirements for chicken house construction, ventilation equipment and manure removal equipment.


How does the layer cage system help farmers develop poultry industry

As long as you ask the farmers who have used the layer cage system how they feel about raising chickens, he will definitely tell you that it is too convenient. So what makes poultry farming equipment popular among farmers?

Guaranteed chicken survival rate. Farmers are very aware that to carry out poultry breeding projects is to make more profits by raising chickens. If the survival rate of chickens cannot be guaranteed, breeding will not be profitable. The poultry equipment system can better manage and care for the chickens and ensure the survival rate of the chickens. In addition, when buying chicken fry, farmers need to go to a regular factory to choose high-quality chicken fry.



Increase the laying rate of laying hens. The aquaculture industry is a relatively complex industry. If you want to increase the egg laying rate, you must meet the daily needs of laying hens and provide adequate nutrition. If the farmers use the automatic egg collection system, the egg breakage rate is 0.3%.

Reduce the breakage rate of eggs. If farmers use manual egg picking, not only will they need to hire staff to increase their expenditure, but it will also increase the chance of egg breaking. If an automatic egg collection system is used, the breakage rate of the egg collection is very small, and workers are no longer required to pick up eggs.

The above is where the automatic layer cage system helps farmers in poultry farming. Hope that through the above introduction, can help farmers to have more understanding of poultry farming equipment.


How to clean the chicken house?

Tools and raw materials: high-pressure water, gun hose, rag Material: water



Methods and steps:


(1) The chicken house can be washed 2 to 3 days after finishing the house. When flushing, follow the principle of up and down and inside and out to ensure the flushing effect and work efficiency, while also saving costs. The sequence of flushing is: ceiling, chicken layer cage system and broiler cage system, feed trough, manure board, air inlet, wall, floor, storage room, rest room, operation room, manure ditch, to prevent the area that has been washed from being renewed Pollution, corners, manure ditch and other corners are the focus of flushing to avoid the formation of "dead corners"; the flushing wastewater is discharged out of the house through the rear of the house and cleaned or fermented in time to prevent it from polluting the farm area and the chicken house environment.


(2) Scrub the parts where the drinking water pipe and the cage contact, wire troughs, material troughs, motors, fans, etc. that cannot be washed or are not easy to be washed. Personnel entering the chicken house must wear clean overalls and work shoes; use clean water and clean cloths when scrubbing; clean the cloths in time; the sewage from washing cloths should not be discharged or spilled in the chicken house, but should be discharged outside the chicken house.

(3) After washing and finishing, the work effect should be checked. The storage room, chicken cage, manure board, manure ditch, equipment control switch, lock box, exhaust outlet and other parts should be checked (each part should be at least Take 5 points or more) to ensure that there is no residual feed, chicken manure, chicken feathers and other dirt. If the flushing fails, the organization should be reorganized immediately.


What novice farmers should pay attention to when using automatic poultry farming equipment?

Automatic poultry farming equipment is very different from traditional farming methods. The use of automated poultry farming equipment to raise chickens has become a trend, and many people are also transforming and upgrading chicken cages. For chicken novices, what are the points to pay attention to when using fully automatic chicken farming equipment?

First of all, you must choose the right chicken raising equipment for your chicken house. Although fully automatic poultry farming equipment is indispensable, the fully automatic chicken breeding equipment adopted by some farmers due to price or blindly following the trend basically does not match their own chicken cages, resulting in waste of resources or insufficient equipment purchase. Common chicken cages, drinking water equipment, ventilation and cooling equipment, feeding equipment, and manure removal equipment in the common fully automatic poultry farming equipment are indispensable.



Second, we must be familiar with the use of fully automatic chicken farming equipment. Although the fully automated chicken raising equipment is simple and quick to operate, it still requires familiarity and learning. Some farmers do not understand it clearly, and it is easy to cause inefficiency, equipment loss and other problems during use.

In addition, disinfection should be carried out before using the fully automatic chicken raising equipment, and the equipment and environment should be disinfected and sterilized from time to time according to their own conditions during use to reduce the prevalence of chickens.


Issues that should be regulated in automatic poultry farming equipment to raise chickens

Nowadays, automatic poultry farming equipment has become the choice of many chicken farms. Good chicken farming technology and methods can not only allow chickens to grow better, but also allow chicken farmers to get better economic income.

But at the same time, there are also some chicken farmers who also use automatic chicken raising equipment, but they have not obtained better benefits. What is the reason? The chicken cage system manufacturers believe that they should not let go when using automatic poultry farming equipment, and should be standardized. Problems in the chicken process.

First, the poultry equipment must be disinfected before and after use. This will not only ensure the sanitation and safety of the chicken coop, but also reduce chicken disease. Note that the disinfection procedures must be standardized to avoid the poor environmental sanitation of the chicken coop that affects the health of the chickens due to inadequate disinfection.

Secondly, when using automatic chicken breeding equipment for feeding, the purchase of feed should be regulated. There are many types of feeds on the market, so you can't blindly pursue low-cost feeds when you buy them. Farmers should choose the correct feed for feeding according to the actual situation of the chicken group.

The most important thing is that farmers should pay attention to epidemic prevention of chickens. Chickens live in battery chicken cages at the same time, and epidemic prevention is the top priority. Farmers should observe the condition of the chickens on time every day. Once sick chickens are found, they should be isolated and treated immediately.

The above are the problems that the shared poultry equipment should pay attention to when raising chickens. It is hoped that farmers can better carry out breeding projects and create more benefits through standardized use of the pen.


Why is it more environmentally friendly to use modern poultry farming equipment?

With the development of society, people are more and more aware of the importance of the environment, and many countries are paying more and more attention to environmental protection. Now the mode of poultry breeding is also changing to environmental protection. The use of modern poultry farming equipment can enable chickens to be managed in an orderly manner, and the chicken manure can be treated harmlessly and with a recycling effect, which is very beneficial to environmental protection.

At this stage, most of the automatic battery cage systems are three-tier or four-tier. The farmers of this tier of chicken cages are very convenient for chicken management. Now the poultry farming equipment has formed a systematic, complete and automatic system, so for farmers with a large number of farms, the use of poultry equipment to develop the breeding industry is a very good opportunity.


Modern poultry systems include poultry cage system, poultry water supply system, poultry feeding system, poultry manure removal system, poultry egg collection system, poultry environmental control system, poultry management system, etc.

In addition, the poultry manure removal system and the egg collection system are respectively arranged on both sides of the net cage support system, and the manure removal system automatically removes the manure to the outside of the breeding equipment. The egg collection system arranges and arranges the produced egg collection on its own, and places it on the egg tray. Multiple systems cooperate with each other and operate in an orderly manner, realizing a larger-scale automated breeding.

The poultry systems cooperate with each other to allow farmers to create more profits while reducing costs, and make the poultry farming industry more environmentally friendly.