Common troubleshooting methods when using chicken farming equipment
- font size decrease font size increase font size
Poultry feeding equipment consists of many equipments. The main equipment includes chicken battery cage system, drinking water equipment, feeding equipment, egg collection equipment and cleaning equipment. It is also used by farmers. In the actual use process, what equipment will have some small faults in the long-term use process, the author will tell the faults that farmers often use these equipments for the farmers to refer to.
1. When the manure is removed, only the roller is driven to rotate, and the manure belt does not move. The reasons for this failure are: there may be too much chicken manure; the rubber roller and the driving roller are not tight; there is a foreign matter stuck to the defecation belt.
Farmers can choose to use the following methods to solve: farmers should pay attention to the regular operation of the septic belt; if the rubber roller and the driving roller are not tightened, the farmer can tighten the expansion bolts at both ends of the driving roller to solve the problem; If the foreign matter catches the problem of clearing the dung belt, the farmer should remove the foreign matter in time.
2. The feeding car does not go: When using the feeding equipment, some farmers' feeding vehicles do not move. The cause of the fault is: driving the wheel, the rope does not move; the positioning plate on the driven wheel is not in contact with the travel switch; the track wheel and the guide rail are squeezed; the motor is damaged.
Farmers can solve the problem by: the farmer can rotate the ratchet of the material, tighten the rope; adjust the position of the travel switch to make contact; correct the guide rails to make them parallel; replace the motor.
3. The chicken manure on the manure belt is thin, the cause of the failure: the chicken manure on the manure belt is thin, which may be caused by water leakage from the drinker; or it may be that the joint at the sink is not well sealed. Another reason is that farmers should pay attention to the presence of chicken diarrhea in the chicken flock. Solution: Replace the drinker; apply sealant to the joint; treat with medication.
4. The egg breaking rate is high, the cause of the malfunction: chicken quail eggs; the eggshell is thin; the claws on the automatic egg collecting machine are broken. The eggs that fell off the cage net collided with the eggs on the egg belt. Eggs coming out of the automatic egg collection machine collide with eggs on the central egg line.
Solution: Farmers can choose to use electric shock lines to prevent chicken quail eggs. In addition, if it is the quality problem of the eggs, the farmers can pay attention to the replacement of the feed formula to enhance the quality of the eggs. Find the replacement of the broken egg; use the egg line; adjust the egg height to make it cushion.
5. The defecation belt runs off, the cause of the failure: the defecation belt runs off, the farmer can consider the rubber roller and the driving roller of the cleaning equipment, whether there is a phenomenon of non-parallel. Also pay attention to whether the ends of the faeces are different; and the cage of the cage is not straight. Solution: Adjust the bolts at both ends of the rubber roller to make them parallel; re-align the welding at the joint; re-correct the cage.
The above five points are the author's description of the common failures of using poultry farming equipment for sale and ways to solve the problem. I hope that the above description can help the farmers. In addition, farmers are reminded that in order to minimize the occurrence of equipment failures, farmers can regularly inspect and maintain the equipment to ensure the efficiency of equipment use.